A contract electronics manufacturer
Scanfil’s Q3 results were largely as expected. Demand remains strong and EBIT should continue to increase as the gradually easing component shortage situation further helps plant productivity.
Q3 figures and management comments largely as expected
Scanfil Q3 revenue grew to EUR 212m, compared to the EUR 210m/209m Evli/cons. estimates. Growth continued to stem across all customer segments. The 26% y/y growth (23% without the EUR 20m transitory spot component purchases) was a record pace and may not be reached again as it was driven by a very high level of customer demand as well as inflation. EBIT amounted to EUR 11.5m vs the EUR 12.3m/11.5m Evli/cons. estimates, and EBIT margin was a decent 6% when excluding the spot purchases. The amount of these transitory items already declined by a third q/q and thus suggests component availability challenges continue to ease, yet the situation will still take a while to wholly normalize.
Underlying growth should moderate a bit but remain strong
Scanfil’s business model allows incremental capacity additions, and hence supply-demand balance is unlikely to be altered too unfavorably even if EMS players, including Scanfil, expand their footprint in response to a particular phase of high demand. The Atlanta investments (EUR 4m in an SMT line as well as additional production space), in addition to production space increases in other locations, will mostly address needs current customers have, although Scanfil is also active in new customer acquisition. Customer demand forecasts remain strong across all key markets, at least for now, and Scanfil’s diverse customer base means demand risks are manageable even in the case of softening.
Further earnings growth with an undemanding valuation
The plant network is performing well, and no plant is lagging. The guidance midpoint suggests y/y growth will continue at a 14% pace in Q4; Scanfil should reach an above 6% EBIT margin even with some spot purchases. The estimated Q4 run-rate EBIT implies well above EUR 50m figure for FY ’23, which should be achievable even if top line growth turns negative due to the lost transitory invoicing items. Meanwhile Scanfil’s valuation is not too demanding, below 9x EV/EBIT on our FY ’22 estimates and around 7x next year. Our updated TP is EUR 7.0 (8.0); retain BUY.
Scanfil Q3 results landed largely in line with expectations as top line was up 26% y/y and EBIT margin amounted to a decent 5.4%. Scanfil expects further improvement for Q4.
Scanfil’s Q2 report didn’t reveal big surprises, although there were a couple of profitability headwinds which should not limit performance that much going forward.
Q2 profitability faced a couple of headwinds
Scanfil Q2 top line grew 23% y/y to EUR 213m vs the EUR 202m/213m Evli/cons. estimates. Growth was 11% when excluding the spot component purchases; 3% was due to inflation and thus underlying comparable growth was ca. 8%, neatly above the 5-7% long-term organic target. Advanced Consumer Applications didn’t achieve much growth without the transitory invoicing items, but other than that demand remained favorable for all segments. EBIT landed at EUR 10.1m vs the EUR 11.3m/11.2m Evli/cons. estimates. The miss can be attributed to the FX loss which was mainly due to strong USD; Scanfil has since put hedges into place, although it’s still not entirely immune to FX moves. Lockdowns in China also hit profitability in Suzhou during the spring, but the situation has since normalized.
Component shortages seem to be easing already
The component availability situation has been a nuisance for well over a year, but there are now signs of improvement. Scanfil sees Q3 spot market purchases already lower than in Q2 yet still somewhat high. The stabilizing component situation will help productivity and profitability going forward, and Scanfil looks to manage its elevated inventory levels down. This easing should be a major factor in helping H2 EBIT higher; Scanfil’s guidance implies meaningful EBIT margin improvement for H2 without any significant changes in product mix. Late increases in production space mean Scanfil can meet high customer demand at least in the short-term, while M&A remains a likely tool for potential larger increases in manufacturing footprint.
Profitability has room to improve quite a bit more
Scanfil may not achieve significant top line growth next year as the spot market purchases fade away, however that should not limit absolute profitability potential. Scanfil’s 7% long-term EBIT margin target remains a relevant benchmark, but it is likely to take at least a few more years to reach that level. Scanfil is valued 7.5x EV/EBITDA and 10x EV/EBIT on our FY ’22 estimates. The multiples are in line with peers’ while Scanfil’s margins top those of the typical peer. We retain our EUR 8 TP and BUY rating.
Scanfil’s Q2 report didn’t serve any major surprises. Top line was largely according to expectations, although Q2 profitability came in a little soft but only implies stronger EBIT in H2.
Scanfil’s profitability is set to improve over the course of the year despite the still tight component market situation.
Profitability should improve throughout this year
Scanfil’s Q1 revenue grew by 20% y/y to EUR 197m, compared to the EUR 170/179m Evli/cons. estimates, and was up by 10% y/y excluding the EUR 17m in transitory spot purchases; inflation added around 2-3% to top line, hence volume growth amounted to about 7%. Growth stemmed widely from all the five segments, including also new customer accounts within Advanced Consumer Applications (kitchen machines for professional as well as consumer use). The EUR 10.3m EBIT was a bit above the EUR 9.2m/9.7m Evli/cons. estimates and the 5.3% margin wasn’t a surprise. The margin would have been 5.7% without the spot purchases, a decent figure but still well short of the 7% long-term potential as component availability issues persisted.
M&A unlikely short-term as organic execution claims focus
Components will remain scarce at least until Q4, however Scanfil’s guidance and comments imply there will be meaningful profitability improvement throughout this year. Inflation isn’t a major issue for Scanfil, and neither is the war likely to have any direct impact. The Chinese virus situation is probably the most significant short-term risk as it could lead to local production halts, but so far this hasn’t happened for Scanfil. Chinese demand also remains strong. Scanfil’s inventory levels are still elevated as the company tries to manage high customer demand and limited component availability. We estimate Scanfil to touch EUR 800m top line already this year. Inorganic growth doesn’t now seem to be that high on the agenda, but M&A could happen in North America or Asia within the next 3-5 years.
Earnings growth is likely to continue next year as well
Scanfil’s valuation, 7.5x EV/EBITDA and 10x EV/EBIT on our FY ’22 estimates, isn’t too demanding. We expect EBIT margin to remain a bit modest 5.8% this year as component issues persist, however we see the margin improving to above 6% in H2’22. We estimate 6.4% margin for FY ’23, and hence we expect Scanfil to reach an above EUR 50m EBIT next year as we see growth continuing at an above 5% annual rate from late ’22 onwards. FY ’23 multiples are therefore only around 6.5x EV/EBITDA and 8x EV/EBIT on our estimates. We retain our EUR 8 TP and BUY rating.
Scanfil’s Q1 top line continued to grow at a 20% annual rate while operating margin remained decent at 5.3%. Relative profitability was therefore close to estimates while the high revenue figure helped deliver a small earnings beat.
Scanfil’s Q4 report didn’t provide any big surprises as figures were slightly above estimates, while the guidance and long-term targets were pretty much as expected.
High growth due to volumes and component inflation
The EUR 192m Q4 revenue, up 24.5% y/y, topped the EUR 183m/185m Evli/cons. estimates by a fair margin. The EUR 14.4m in spot purchases were spread even between the five segments, relative to their sizes. Energy & Cleantech grew the most also in Q4. It was known before that Q4 would fall short of Scanfil’s EBIT potential as component issues and infections limited productivity, but the EUR 10.2m adj. EBIT was a bit above the EUR 9.7m/9.6m Evli/cons. estimates. The Q4 issues are by their nature temporary; in our view Scanfil’s guidance and comments suggest the situation is improving, or at least has stabilized.
Performance is set to improve this year and beyond
All the segments grew last year. We expect Energy & Cleantech to contribute most growth this year as the segment benefits from many megatrends and includes customers such as TOMRA. Inventories grew EUR 90m last year due to high demand but also in response to the component challenges. Scanfil suggests spot purchases may be lower again in H2’22; we estimate margin improvement throughout the year. Scanfil mentioned possible expansion in Asia beyond China, and this would be likely in countries such as India, Vietnam, and Malaysia. In our view such an expansion would be more likely through M&A than greenfield. Scanfil has recently announced expansions to its plants in the US and Germany, and hence capex will be a bit above 2% of revenue this year. An expansion to the Suzhou plant might also follow.
Multiples have declined, favorable outlook is much intact
We make only marginal estimate revisions. Scanfil is valued 6.0-7.5x EV/EBITDA and 8.0-9.5x EV/EBIT on our FY ’22-23 estimates. In our view the medium to long-term demand and earnings outlook hasn’t changed much in the past 3-6 months, while valuation has declined by 15-20% (peer valuations have declined by roughly similar percentages). Scanfil’s multiples are now well in line with peers, but in our view a premium can be justified by the fact that Scanfil’s EBIT outlook remains somewhat higher than that of a typical peer. We revise our TP to EUR 8 (9) as the sector’s valuations have declined, but our rating remains BUY.
Scanfil’s Q4 top line grew by 24.5% y/y and was well above the estimates. We find the beat stemmed from many customer segments. The EUR 10.2m adjusted EBIT also topped estimates, while the guidance for this year should not prompt any major estimate changes. In our view the 5-7% organic CAGR target is also in line with expectations.
Scanfil’s earlier guidance suggested Q4 to be highly profitable, and we had estimated 6.9% EBIT margin, but well-known challenges have proved persistent for now.
The fresh guidance implies some 5.1% Q4 EBIT margin
Scanfil issued a negative profit warning. Plants’ productivity has suffered due to continued component availability challenges, and the worsened Covid-19 situation has also bothered production. Q4 EBIT is further hit by the FX exposure due to the relatively high inventories, which the company build up earlier this year to be better able to meet demand by anticipating needs early on. Scanfil’s previous guidance suggested EUR 166-206m in Q4 revenue and EUR 11-14m EBIT. The new range implies EUR 176-196m top line and EUR 8-11m EBIT. We don’t view the news as a major issue in the long-term context because the challenges are to a large extent transitory in nature, although the pandemic and component shortage situations will persist at least during the early part of next year. Scanfil however doesn’t have to struggle with cost inflation since the contracting logic covers component purchases. Customer demand has also remained strong in Q4.
We continue to expect strong performance for next year
We make only small revisions to our top line estimates, but we revise our Q4 EBIT estimate down to EUR 9.7m from EUR 12.5m. We revise our FY ’22 EBIT estimate down to EUR 46.3m (prev. EUR 48.5m). The Hamburg restructuring measure by itself should help some EUR 2.5m in terms of cost savings; we hence expect 17% EBIT improvement for next year as the component and Covid-19 issues will begin to ease. Scanfil is set to achieve a robust double-digit top line growth this year, and we continue to estimate 7% growth for FY ’22. In our opinion 7% EBIT margin remains very much an appropriate long-term profitability target for Scanfil, and the company is unlikely to make any changes around that specific figure.
Earnings multiples are not expensive relative to peers
Scanfil is valued 9.5x EV/EBITDA and 13x EV/EBIT on our FY ’21 estimates. The levels aren’t particularly low, but in our view both demand and earnings growth outlook remain robust enough to warrant a longer perspective. The multiples are 8.5x and 11x on our FY ’22 estimates. We retain our EUR 9 TP and BUY rating.
Scanfil’s Q3 EBIT faced some headwinds, but Q4 EBIT is set to improve and outlook for FY ‘22 doesn’t seem bad either.
We expect the Q3 margin softness will prove temporary
Scanfil’s Q3 revenue grew by 18.5% y/y and amounted to EUR 167.8m vs the EUR 165.5m/171.2m Evli/cons. estimates. The growth was for the most part attributable to Advanced Consumer Applications and Energy & Cleantech segments, while Medtech & Life Science continued to grow at a 12% y/y pace. Advanced Consumer Applications had to make many spot components purchases and excluding all such transitory items top line grew by 10.2% y/y. Component availability issues limited Scanfil’s ability to meet customer demand and the challenges also hurt relative profitability. We understand the component scarcity situation limited profitability to the tune of EUR 1.0-1.5m. Q3 EBIT amounted to EUR 9.5m (5.7% margin), compared to the EUR 10.8m/10.9m Evli/cons. estimates. The challenging component situation will not fade away for quite some time, however Scanfil’s comments indicate there should be no major earnings drag going forward.
Spot purchases’ margin dilution is likely to be transient
Inventories increased by 63% y/y and 24% q/q as Scanfil wanted to secure necessary components to meet strong customer demand. This had a negative impact on cash flow, but Scanfil sees the situation is under control and inventories should not grow much more from here on. The new normal, in terms of component availability challenges, might mean revenue streams related to component spot sourcing will begin to generate adequate margins already during the next few quarters.
In our view earnings growth is set to continue next year
We expect Scanfil’s Q4 EBIT to improve q/q and y/y; our EUR 12.5m estimate translates to a very good 6.9% margin. The company’s comments on customer demand and component pricing dynamics suggest favorable outlook for next year’s earnings. We expect organic growth to continue in FY ’22 at a 7% pace; we see Scanfil reaching a 6.6% EBIT margin then, which would translate to EUR 48.5m in EBIT. The Hamburg restructuring also supports earnings growth going forward. Scanfil is valued 7.8-8.6x EV/EBITDA and 10.1-11.7x EV/EBIT on our FY ’21-22 estimates. We retain our EUR 9 TP and BUY rating.
Scanfil’s Q3 revenue landed close to expectations, but the EUR 9.5m EBIT fell a bit short of estimates. Scanfil’s FY ’21 guidance, however, implies Q4 EBIT will be considerably higher.
• Q3 revenue grew by 18.5% y/y to EUR 167.8m, compared to the EUR 165.5m/171.2m Evli/consensus estimates. EUR 11.7m of revenue amounted to transitory separately agreed low-margin customer invoicing due to component availability issues. Most of this transitory revenue was located within Advanced Consumer Applications. Revenue growth excluding the transitory items was 10.2% y/y.
• Advanced Consumer Applications’ top line was EUR 55.4m, while we expected EUR 46.7m. Energy & Cleantech amounted to EUR 43.5m vs our EUR 41.7m estimate. Automation & Safety was EUR 32.5m, compared to our EUR 38.1m.
• Scanfil Q3 adjusted EBIT amounted to EUR 9.5m vs the EUR 10.8m/10.9m Evli/consensus estimates. EBIT margin was 5.7% vs our 6.5% estimate. According to Scanfil material constraints and the Hamburg factory closure caused about a EUR 2m negative EBIT impact for the quarter. Scanfil’s guidance midpoint also suggests Q4 EBIT will be some EUR 3m higher q/q.
• Scanfil guides FY ’21 revenue at EUR 670-710m and adjusted EBIT at EUR 41-44m (unchanged).
• Scanfil retains its long-term financial targets for now (EUR 700m revenue on an organic basis in FY ’23 with a 7% EBIT margin).
Scanfil made a minor guidance update and by implication organic growth rate will reach well into the double digits this year. We upgrade our FY ’21 growth estimate by 4% and expect the positive momentum to spill over to next year as well. We retain our EUR 9 TP; our new rating is BUY (HOLD).
FY ’21 revenue guidance midpoint increases by 5%
Scanfil issued a small guidance update. The new range is EUR 670-710m in FY ’21 revenue and EUR 41-44m in adj. EBIT, while the previous guidance was respectively EUR 630-680m and EUR 41-46m. Most important recent trends, namely strong customer demand and climbing component prices, have persisted. Scanfil continues to flag the supply chain risk related to semiconductor availability and the guidance update is not in our view that big news. Our previous estimates for this year were EUR 658m in revenue and EUR 43m in adj. EBIT. Our updated revenue estimate stands at EUR 681m; we make no changes to our absolute FY ‘21 adj. EBIT estimates.
Strong growth supports absolute profitability estimates
Scanfil H1’21 growth amounted to 12% y/y; we previously estimated H2’21 y/y growth at above 8% and now expect more than 16%. We reckon the positive surprise extends beyond this year and we have updated our FY ’22 growth estimate to 7.0% (prev. 5.8%). The improved growth outlook supports our absolute profitability estimates for the coming years to the tune of EUR 1-2m. The updated outlook also means the EUR 700m organic revenue target for FY ’23 is now pretty much irrelevant as the company might well break through that threshold already this year. We expect Scanfil to communicate a new long-term target at some near future date, however we don’t expect the company to make any revisions to its long-term 7% EBIT margin target.
In our view valuation has now turned more attractive
Scanfil’s share price has slipped a bit since the previous update while growth outlook has improved an additional notch. On our updated estimates for FY ’21-22 Scanfil is now valued 8.0-8.6x EV/EBITDA and 10.3-11.8x EV/EBIT. The multiples remain slightly above those of a typical peer, but we continue to view the premium warranted. We retain our EUR 9 TP; our rating is now BUY (HOLD).
Scanfil hosted its first-ever CMD yesterday, during which the company elaborated on customer service and internal processes. Long-term financial targets were left unchanged.
The focus was on Scanfil’s positioning and latest trends
The CMD added color on Scanfil’s comprehensive manufacturing service model and value chain positioning. Scanfil’s service has over the years evolved to cover the entire life cycle for many high-mix low-volume industrial electronics products. Scanfil’s own processes now appear well harmonized across the factory network. Scanfil can take care of the final product’s delivery to end-use location, as highlighted in the case of TOMRA’s reverse vending machines and grocery stores. Established OEM customers amount to 85% of accounts (95% of revenue) while start-ups make up the rest. Each factory has its own P&L and Scanfil monitors their strategic position as well as financial performance. The divested plant in Hangzhou was performing well in financial terms but no more seemed a great fit strategy-wise, whereas in the Hamburg closure case the reverse was true. According to Scanfil the Connectivity segment should have the highest relative growth potential, not a big surprise considering it is still by far the smallest of the five. Semiconductor sourcing challenges seem set to last at least until 2022 and affect accounts across all the segments. Scanfil doesn’t see any internal bottlenecks an issue; business has mostly managed to stay on course thanks to extended planning and demand forecasts.
Organic growth potential is strong for the coming years
Scanfil recently announced the EUR 6m planned investment in Suzhou to double the current plant’s production capacity. We consider this an efficient way to address organic growth opportunities driven by Chinese demand. Scanfil has also added new staff in China and the US to help capitalize on local sales potential. We continue to expect ca. 7% organic CAGR going forward, a strong figure in the EMS context.
The overall valuation context has not changed
Scanfil left its long-term financial targets intact for now and we make no changes to our estimates. Valuation hasn’t changed much since the last update; Scanfil trades around 8.5-9.0x EV/EBITDA and 11-12x EV/EBIT on our FY ’21-22 estimates. We retain our EUR 9.0 TP and HOLD rating.
Scanfil’s Q2 top line was close to estimates while EBIT didn’t quite reach expected levels. We make only minor estimate revisions. Our rating is now HOLD (BUY).
Some softness in Q2 EBIT margin, but nothing major to flag
Q2 revenue, incl. transitory invoicing, grew 11% y/y to EUR 173m. The figure was EUR 166m excl. the component-related items and can be compared to the EUR 165m/169m Evli/cons. estimates. Automation & Safety top line remained flat while both Advanced Consumer Applications and Energy & Cleantech grew by more than 30%. Advanced Consumer Applications had account ramp-ups and high demand persisted for familiar favorably positioned customers. Energy & Cleantech performed strong even without big ramp-ups as the customers’ markets expand, and we believe Scanfil has gained share within attractive accounts like TOMRA. Component availability challenges remain, but the shortage situation didn’t have any big negative effect on Q2 performance; the situation may now be improving or at least isn’t worsening. The EUR 10.6m Q2 EBIT was a tad soft compared to the EUR 10.9m/11.1m Evli/cons. estimates. In our view the Hamburg plant closure costs explain a large part of the shortfall.
Our FY ’21 estimates remain close to the guidance midpoint
We make only very small revisions to our estimates. In our view cost inflation is not an issue for Scanfil, while component availability is for now a challenge for pretty much all EMS companies. Scanfil will host its first ever CMD in September and we wouldn’t be surprised to see an upgrade to the current organic growth target. We now see Scanfil is headed for the EUR 700m figure a year in advance. Scanfil can top the 7% EBIT margin target at least on a quarterly level, but we would view any upgrade to this target ambitious because growth in the EMS business often doesn’t scale that much in terms of relative profitability. This is one of the major factors that limit valuation.
We view current valuation picture neutral
Scanfil is now valued ca. 9x EV/EBITDA and 12x EV/EBIT on our FY ’21 estimates. We believe growth continues to drive absolute earnings up in the coming years and so the multiples should be down to around 8x and 11x already next year. The valuation represents a premium relative to peers, but in our opinion is warranted. We retain our EUR 9.0 TP; rating now HOLD (BUY).
Scanfil’s Q2 didn’t offer many surprises. Top line was close to expectations while there was a small shortfall in operating margin relative to estimates.
Scanfil Q2 revenue was EUR 172.9m, compared to the EUR 165.3m/168.6m Evli/consensus estimates. Top line grew by 11% y/y and included EUR 7.4m of transitory separately agreed, low margin customer invoicing. This was related to the ongoing component shortage situation and excluding these items revenue grew by 6.4% y/y to EUR 165.5m.
Advanced Consumer Applications’ revenue amounted to EUR 53.4m vs our EUR 47.7m estimate. Meanwhile Energy & Cleantech was EUR 44.8m, compared to our EUR 40.9m estimate. Automation & Safety top line stood at EUR 36.8m vs our EUR 39.5m estimate.
Q2 EBIT stood at EUR 10.6m vs the EUR 10.9m/11.1m Evli/consensus estimates. EBIT margin was 6.1% vs our 6.6% estimate. According to Scanfil the production transfer and planned closure of the Hamburg factory, which will happen by the end of September, generated additional costs.
Scanfil guides EUR 630-680m revenue and EUR 41-46m adjusted operating profit for FY ’21 (issued on Jun 11). Especially semiconductor availability continues to create uncertainty around the outlook.
Scanfil upped guidance as demand remains strong and component supply risks haven’t materialized. The upgrade isn’t a big surprise, but in our view supports the long-term story. Our new TP is EUR 9.0 (8.5), rating now BUY (HOLD).
Not a big surprise, but hints at extended strong demand
Scanfil upgraded its FY ’21 guidance. The revision wasn’t a big surprise since in our view Scanfil already seemed, following the Q1 report, bound towards the upper end of its then current guidance range. The revenue midpoint increases by 5.6% with the upgrade. Our old EUR 630m revenue estimate lands at the lower bound of the new EUR 630-680m range. We revise our estimate up by 2.5% to EUR 646m. Our old EUR 41.7m adj. EBIT estimate can be seen in the context of the new EUR 41-46m range. Our new estimate is EUR 43.2m. In our opinion the new outlook’s key meaning is in the fact that it lends long-term estimates even more relevance. Our absolute EBIT estimates for FY ’22-23 increase by only ca. EUR 1m, but in our view Scanfil’s outlook now warrants some additional expansion in multiples.
We see organic CAGR outlook has moved to 7% from 5%
Scanfil’s long-term organic growth target, which implies ca. 5% CAGR by the end of FY ’23, has gained relevance ever since last fall. Scanfil has an unblemished operational track record, its segments’ outlooks are either good or great, and macro tailwinds continue to push many industrial sectors. From this perspective Scanfil should have no trouble reaching EUR 700m top line in FY ’23. The updated FY ’21 guidance range’s midpoint implies 10% growth for this year. We consider this a bumper year for Scanfil and the situation is not unlike that for many other companies operating within the industrial manufacturing value chain. We would not extrapolate such growth rates very long into the future, but nonetheless the general outlook suggests Scanfil is positioned for around 7% CAGR in the years to come.
In our view some further multiple expansion is justified
Scanfil’s 8.5x EV/EBITDA and 11.5x EV/EBIT multiples, on our FY ’21 estimates, are high in the historical context, but growth outlook warrants looking further into the future. The multiples decrease to ca. 8x and 10.5x already next year. In our view Scanfil’s performance and positioning also warrant a peer premium. Our new TP is EUR 9.0 (8.5), rating now BUY (HOLD).
Scanfil’s Q1 featured very few surprises. The company remains well-positioned and many customer megatrends continue to drive demand in the short as well as long term perspective. Our TP is now EUR 8.5 (8), rating HOLD (BUY).
All five segments have developed positive since Q3’20
Scanfil’s EUR 163m Q1 revenue was above the EUR 152m/151m Evli/cons. estimates even when excluding the discontinued trade in Hangzhou. Organic growth was 7% y/y when excluding the discontinued business. Scanfil renewed its segment structure as the previous Industrial segment had become too diverse. Advanced Consumer Applications and Energy & Cleantech, the two largest segments, both grew rapid. The former’s demand stemmed e.g. from elevators (as well as new customers) while the latter was driven by e.g. reverse vending machines. The other three segments have also continued to develop well since Q3’20, demand overall improved throughout Q1 and March was especially strong and profitable. Scanfil posted EUR 10.0m in Q1 EBIT, in line with the EUR 10.5m/10.0m Evli/cons. estimates.
Strategy and day-to-day execution continue to work
In our view Scanfil is headed for the upper end of its FY ’21 revenue guidance range. Demand outlook supports Scanfil’s long-term organic growth target and implies 5-6% CAGR in the years ahead. The accounts are unlikely to build up inventories, rather there seems to be solid demand that stems from many megatrends. Component bottlenecks are possible but so far these haven’t had a negative impact on Scanfil. The company takes proactive measures to better anticipate demand and so secure relevant components early on. Scanfil also reports no gross margin pressure and remains able to pass price inflation forward to customers. M&A options remain relevant in the long-term.
In our view further upside is not found in the short-term
Scanfil is valued ca. 9x EV/EBITDA and 12x EV/EBIT on our FY ‘21 estimates. In terms of EBITDA the share trades at a peer premium while the EBIT multiples are in line. Scanfil is thus valued at a small premium and we see this well justified. Scanfil’s and peers’ multiples have alike rerated recently. EMS companies used to be valued very low, and in our view the current higher multiples are warranted at least in Scanfil’s case. We view Scanfil’s valuation now neutral. Our new TP is EUR 8.5 (8) and rating HOLD (BUY).
Scanfil’s Q1 was a clear positive surprise in terms of revenue. Profitability was more in line with expectations. Scanfil did not revise its guidance but updated the segment structure.
Scanfil’s Q4 didn’t serve any major surprises, but the overall picture turned even more encouraging. Our new TP is EUR 8.0 (6.5). Our rating is now BUY (HOLD).
Q4 figures as well as FY ’21 guidance in line with estimates
Scanfil Q4 revenue, flat y/y at EUR 154m, met the estimates. The Communication segment’s top line remained a bit soft. This wasn’t big news as the Hangzhou divestment and low base station product sales were known. The pick-up in Consumer Applications’ demand was a positive surprise given that the segment had been underperforming already before the pandemic. Energy & Automation posted a respectable 18% organic growth. Industrial and Medtec & Life Science performed close to estimates. We view these two the most stable segments and positioned for ca. 5% growth in the coming years (it should be noted Medtec & Life Science hasn’t gained any meaningful demand due to the pandemic). Scanfil thus posted EUR 10.4m Q4 EBIT, compared to the EUR 10.0m/9.9m Evli/cons. estimates.
Both guidance and comments are encouraging
We revise our estimates up a bit as the guidance implies demand holds even in an environment best described as extraordinary. Our previous EUR 617m FY ’21 revenue estimate was close to the EUR 620m midpoint; we revise the figure up to EUR 625m. We continue to expect the same EBIT margin as before and so our EBIT estimate only increases from EUR 41.6m to EUR 42.2m. This is not a big quantitative difference, but the report adds confidence. Scanfil says outlook is perhaps a bit better now than a few months ago, in addition to which gross margin improved slightly in Q4. It thus seems unlikely the guidance will fail, particularly considering Scanfil’s history. The company’s balance sheet is ready for M&A, although any deal is not imminent. Relatively low capex needs also help the overall valuation picture, even if the share price has gained a lot in recent months.
Performance and outlook warrant higher valuation
In our opinion Scanfil’s extended track record and robust outlook justify higher multiples. Our updated EUR 8.0 (6.5) TP values Scanfil at about 8.5x EV/EBITDA and 12x EV/EBIT on our estimates for this year. Earnings growth would help to decrease the multiples to respective 8x and 10.5x levels next year. Our TP is now EUR 8.0 (6.5). Our new rating is BUY (HOLD).
Scanfil capped 2020 strong and we didn’t find notable negatives from the Q4 report. Scanfil enters this year with confidence and the guidance is in line with the long-term organic growth targets.
We remain confident towards Scanfil’s long-term value chain positioning, however in our opinion recent share price gains have largely neutralized valuation. Our new TP is EUR 6.5 (6.25) and our rating is now HOLD (BUY).
The performance amid the pandemic testifies to strengths
Scanfil’s business has remained robust to macroeconomic shocks throughout its 40+ year history. ‘20 is another testament to this resilience as the pandemic hasn’t considerably affected Scanfil’s performance. The company has had to make only very small revisions to FY ’20 guidance; the latest revenue and EBIT outlook figures are down by respective 2% and 5% compared to the initial figures issued before the pandemic broke out. We now expect Scanfil to achieve some 3% top line growth for FY ’20; the increase is due to the 2019 HASEC acquisition. Profitability has remained strong. The Energy & Automation, Industrial and Medtec & Life Science segments have extended their good figures, while Communication and Consumer Applications have been softer. Consumer Applications’ revenue is down by ca. EUR 40m since FY ’18, however we view the segment still has good long-term outlook. We aren’t estimating rapid rebound for the segment yet see Scanfil should be able to post a 4% organic CAGR in the coming years thanks to its three largest ones.
We expect stellar performance to continue
We see Scanfil remains in top shape overall and is probably one of the best performing decent-sized contract electronics manufacturers globally. In our opinion Scanfil is unlikely to encounter profitability issues going forward and long-term organic growth outlook still appears good despite the pandemic. The company is also in a strong position to do more M&A and we are confident any potential deal, small or large, is likely to further improve Scanfil’s competitiveness.
Multiple expansion was overdue, yet visibility is limited
Scanfil’s share has appreciated significantly, and in our view some multiple expansion was long overdue given the company’s strong track record. Scanfil now trades in the range of 7-8x EV/EBITDA on our estimates for ’20-21, a level we don’t consider that challenging, but also view to be enough to curb meaningful additional gains for now since revenue visibility is limited even in the best of times. Our TP is EUR 6.5 (6.25), rating HOLD (BUY).
Scanfil’s top line didn’t meet our estimate but profitability remained strong. We retain our EUR 6.25 TP, rating BUY.
Some top line softness but in our view nothing dramatic
Scanfil posted EUR 141.6m in Q3 revenue, down 7% y/y. The figure didn’t meet our EUR 156.2m estimate largely due to the Communication and Industrial segments. Communication revenue fell by 28% q/q mostly as a result of low demand for network elements. The segment also supplies other types of products and we expect revenues to stabilize in Q4. Consumer Applications’ top line remained low as expected, slightly up by q/q but down by 23% y/y. There are signs the segment’s demand is bottoming out and we expect more improvement for Q4. Energy & Automation and Medtec & Life Science performed close to expectations, but Industrial managed only EUR 44.7m (vs our EUR 50.5m estimate) and was down by 9% y/y. Industrial softness wasn’t attributable to any single customer and was pronounced in July and August. Demand nevertheless improved in September. In absolute profitability terms Scanfil’s EUR 9.9m Q3 adj. EBIT didn’t quite reach our EUR 10.5m estimate, however the quarter still delivered a strong 7% operating margin.
Guidance implies meaningful q/q improvement for Q4
The low-end of the updated FY ’20 guidance implies 5% q/q Q4 revenue increase, while the high-end implies 19% growth. We make only small updates to our Q4 estimates, and now expect EUR 154m in Q4 revenue (prev. EUR 158m), down by 1% y/y and up by 8% q/q. We now expect Q4 EBIT at EUR 10.0m (prev. EUR 11.1m). Scanfil’s overall positioning within the value chain and relative to competition remains unchanged. The company has a balance sheet ready to facilitate acquisitions should a fitting opportunity arise. There’s a lot of uncertainty but we note Scanfil’s customers tend to be well-positioned OEMs who compete against each other directly only to a very limited extent.
Valuation is still very reasonable
Scanfil is valued at about 6.3x EV/EBITDA on our FY ’20 estimates. Scanfil’s organic strategic growth target for ’23 implies some 5% CAGR for the coming years. Although the target was decided on before the pandemic, we still view it quite relevant considering the customer portfolio and performance so far this year despite the uncertainty. Our TP remains EUR 6.25 and our rating BUY.
Scanfil reported Q3 revenue slightly on the soft side, however the overall picture seems to remain pretty much unchanged with demand and profitability as previously expected.
Scanfil’s Q2 clearly beat our estimates. The company’s active plant network management should help secure good profitability in the coming years even if the pandemic will eventually begin to hurt business more. Our TP is now EUR 6.25 (5.25); we reiterate our BUY rating.
Communication and Energy & Automation up organically
Scanfil Q2 revenue was EUR 156m (up 9% y/y and of which two-thirds due to HASEC i.e. mostly Industrial). Communication posted a 49% revenue surge. Business jumped due to 5G networks but also e.g. camera surveillance systems. Energy & Automation grew by 15% as many accounts drove growth. Industrial top line grew by 17% mainly due to HASEC, yet also organically with e.g. KONE elevators. Medtec & Life Science was flat. Consumer Applications demand fell as the pandemic altered consumer behavior. The segment supplies e.g. TOMRA reverse vending machines and Scanfil says many accounts cut business sharply in Q2, leading to 26% y/y drop in revenue. Scanfil is however seeing signs of stabilizing demand for the segment. The EUR 10.2m in Q2 EBIT (vs our EUR 8.7m estimate) was more than satisfactory as Scanfil estimates the pandemic’s effects’ net cost was EUR 0.8m in H1. The pandemic notably elevated freight and safety costs. On the other hand, Scanfil also received state subsidies in compensation for shortened working hours.
Fundamentally strong thanks to active plant management
We make minor estimate changes, mostly reflecting latest segment updates. We see FY ’20 EBIT at EUR 40.4m. While FY guidance is likely to hold it’s early to say much about next year. However, Scanfil’s Hamburg plant closure will further help profitability going forward. Scanfil expects the decision to yield EUR 2.5m in annual cost savings since two other nearby plants are in a better position to serve the current Hamburg accounts. Scanfil also prunes its Chinese operations, having sold the Hangzhou plant (sheet metal mechanics) and thus focusing on Suzhou (electronics manufacturing and demanding integration).
In our opinion higher multiples are justified
The pandemic could begin to hurt volumes even if so far Scanfil’s overall levels have not been impacted. Scanfil however remains valued at attractive levels, ca. 6.5x EV/EBITDA and 9.0x EV/EBIT on our FY ’20 estimates. Our new TP is EUR 6.25 (5.25), rating BUY.
Scanfil’s Q2 clearly exceeded expectations. Revenue grew by 9% y/y and slightly more than a third of the increase was organic, the rest being attributable to the HASEC acquisition (mainly recognized in the Industrial segment).
Scanfil operations continue to develop on a positive note as industrial OEM customer demand seems remarkably strong in the face of the pandemic. We have made rather small downward revisions to our estimates due to increasing uncertainty. Our TP is EUR 5.25 (5.75), rating BUY.
No dramatic effects to segment performances so far
Q1 revenue grew by 11% y/y (two-thirds due to the HASEC acquisition) to EUR 144m and thus beat estimates by ca. EUR 10m. ROI, at 17.8% in Q1, continued to develop strong. February saw the Chinese plants stall due to the coronavirus situation that hadn’t back then escalated into a pandemic. There has been only one production plant closure so far since (in Poland). In fact, March was the strongest month in terms of (organic) growth and helped to compensate for slow February. According to Scanfil supply chains have continued to work well and only a few customer accounts have seen demand forecasts drop for Q2 and Q3. Naturally uncertainty is growing but for now Scanfil can reiterate its previous strong outlook for this year.
Scanfil continues to perform and is ready for acquisitions
We have slightly revised our estimates down due to increased uncertainty. The adjustments are remarkably small, amounting to an average of EUR 6m in quarterly revenue, or 4%. We have also done a small downward adjustment to operating margin, now expecting 6.5% instead of the previous 6.75%. We thus see EBIT at the low bound of the guidance range i.e. at EUR 39.0m; we previously expected EUR 41.4m. Scanfil says it has a liquidity position of some EUR 60m ready to be deployed for e.g. M&A.
A valuation above peer multiples is well justified
The pandemic seems to pose no cracks to Scanfil’s fundamentals. According to one narrative the pandemic will reverse globalization and thus supply chains and actors such as contract manufacturers are hit particularly hard. In our opinion such stories fly a bit too high and are based on unsound reasoning. Scanfil’s comments readily confirm industrial OEMs still want to outsource significant amounts of production. We update our TP to EUR 5.25 (5.75) due to increased macroeconomic uncertainty but note how few facts seem to impair Scanfil’s long-term story. We see good upside to Scanfil’s 5.5x EV/EBITDA and 7.5x EV/EBIT ‘20e valuation multiples.
Scanfil’s Q1 revenue clearly exceeded our and consensus estimates. Communication, Energy & Automation as well as Industrial segments were stronger than we expected. Scanfil says profitability developed as expected and reaffirms FY ’20 outlook.
Scanfil’s Q4 results fell slightly short of our expectations, yet overall there were no significant changes in the wider picture. The HASEC acquisition helped Industrial as well as Medtec & Life Science top line, however both segments extended strong organic growth. Scanfil aims to grow at a 5% organic CAGR according to its updated long-term target; in our view there’s still good upside to current multiples. Our TP is now EUR 5.75 (5.25), remain BUY.
All segments continued to grow except Communication
Scanfil’s EUR 155m Q4 revenue didn’t quite meet our EUR 159m estimate yet grew by 10% y/y. The Industrial segment (key accounts include Kone) jumped by a third in Q4 (Q3 y/y growth was 52%), and so the EUR 47m revenue almost met our EUR 51m estimate. Scanfil says the performance has been due to organic growth but the HASEC acquisition also helped. Medtec & Life Science (potential customers include Thermo Fisher Scientific and Vaisala) top line grew by 17% y/y and so was in line with our EUR 29m estimate. Scanfil says the segment grew mostly in an organic fashion, receiving only slight lift from the German acquisition. Energy & Automation (e.g. Valmet) continued to grow at a stable organic 6% annual rate. Consumer Applications has stabilized for two quarters now, but the business is rather seasonal. Communication (e.g. Nokia) fell by 24%, yet Scanfil says the segment could well stabilize this year. Scanfil’s Q4 operating margin, at 6.5%, was 60bps below our estimate; we still think the company will easily reach its 7% long-run target.
Scanfil targets 5% organic CAGR during the next four years
We estimate Scanfil has grown at a 6% organic rate during the last two quarters. Considering Scanfil’s strong cost, quality and delivery record we view the company’s 5% CAGR target as highly feasible, especially given a good positioning in Industrial and Medtec & Life Science, which we estimate to contribute some two-thirds of all the organic growth going forward.
In our view Scanfil can be valued above peer multiples
Although lowish valuation multiples are in general well-advised for contract electronics manufacturers, in our view Scanfil’s strong profitability track record as well as organic growth outlook justify higher than the current 6x EV/EBITDA and 8x EV/EBIT ‘20e multiples. Our new TP is EUR 5.75 (5.25), retain BUY.
Scanfil’s Q4 didn’t reach our expectations as top line missed our estimate by a few percentage points while operating margin was some 60bps lower than we expected.
• Scanfil Q4 revenue amounted to EUR 155m vs EUR 159m/157m Evli/consensus estimates.
• Communication top line was EUR 21m, while we estimated EUR 23m.
• Consumer Applications’ revenue was EUR 28m, compared to our EUR 27m estimate.
• Energy & Automation recorded EUR 29m Q4 revenue vs our EUR 29m estimate.
• Industrial top line amounted to EUR 47m vs our EUR 51m expectation.
• Medtec & Life Science Q4 revenue was EUR 29m, compared to our EUR 29m estimate.
• Scanfil’s Q4 EBIT stood at EUR 10.0m vs EUR 11.3m/11.0m Evli/consensus estimates. Operating margin thus amounted to 6.5%, whereas we estimated 7.1%.
• The BoD proposes EUR 0.15 (0.13) dividend per share to be distributed, which we had estimated at EUR 0.16.
• Scanfil guides ’20 revenue in the EUR 590-640m range and expects adjusted operating profit to amount to EUR 39-43m. We find this guidance range unsurprising as FY ’19 revenue stood at EUR 579.4m while adjusted operating profit was EUR 39.4m. Scanfil says the guidance is subject to exceptional uncertainty due to the coronavirus situation.
• Scanfil updates its long-term financial target, according to which Scanfil aims to reach EUR 700m revenue organically in ’23 (previously EUR 600m in ’20) with a 7% operating margin.
Scanfil’s 7.9% EBIT margin topped our estimate, and while the result was partly due to a favorable product mix, we now see the company in shape to post 7% EBIT margins on a regular basis. Our new TP is EUR 5.00 (4.75), rating BUY.
HASEC contributed, yet organic growth was also decent
Scanfil’s sales have developed in a stable fashion during the last few years. The Communication segment was the only one of the five where revenue declined y/y. The segment supplies telecommunications companies with products such as base stations, is arguably the most cyclical and challenging of Scanfil segments, and with LTM revenue of EUR 86m the smallest. Nevertheless, even Communication sales have been improving since Q2. Consumer Applications and Energy & Automation grew slightly, and Medtec improved by 14% relative to the soft comparison period. Most noteworthy was the Industrial segment, which contributed ca. 80% of the revenue increase, and as such the most significant segment generates almost a third of Scanfil revenue. Although HASEC added revenue meaningfully, more than half of the Industrial segment’s growth was organic.
We see Scanfil able to routinely post 7% EBIT margins
Scanfil says the integration of HASEC is proceeding according to plan. Revenues attributable to HASEC will be mostly reported under the Industrial and Medtec segments. Scanfil says the strong 7.9% operating margin was partly due to favorable product mix, and so we wouldn’t extrapolate this profitability level too far. However, Scanfil posted an above 7% operating margin also in Q2 with what the company says was a normal product mix. It’s early to assess prospects for next year, but in the light of such performance Scanfil’s 7% operating margin target for ’20 might start to look a tad conservative.
We raise our TP due to continued good performance
We’ve made upward revisions to our EBIT estimates, now expecting Scanfil to reach 7.0% margin already in ’19 (we previously expected 6.6%). We base our TP on Scanfil’s historical multiples, which have valued the company at some 7x EV/EBITDA and 9x EV/EBIT, and thus our updated TP stands at EUR 5.00 (4.75). Our rating remains BUY. We also note Scanfil’s peer group multiples have gained sharply during the last couple of months.
Scanfil’s Q3 revenue, at EUR 152m, missed our EUR 163m estimate by 7%, however the company still managed to beat our EUR 11.4m operating profit expectation by posting a figure of EUR 12.1m.
Scanfil didn’t meet our revenue estimate but nevertheless managed to beat in terms of EBIT. Overall Q2 was rather undramatic, yet we note that volumes need to continue to improve during H2’19 if the company is to deliver on FY guidance. We retain our EUR 4.75 TP and our BUY rating.
Scanfil expects improved customer demand during H2’19
Scanfil posted EUR 143m in Q2 revenue (vs our EUR 158m estimate), thus adding 10% q/q but losing 6% y/y. Revenues were quite evenly spread between the five segments. The y/y revenue decline was mostly attributable to the Consumer Applications segment, which decreased by 29% (a major product will fold due to low demand), however the Communication segment (e.g. base stations) was also soft, declining by 18%. Despite soft Q2 revenue Scanfil managed to top our EUR 10.0m EBIT estimate. The reported EUR 10.3m figure (7.2% EBIT margin vs our 6.3% estimate) testifies to plant network efficiency (strong EBIT margin with a normal product mix). Scanfil notably has a strong record in cost control.
Scanfil writes down Hamburg, closes the HASEC acquisition
Scanfil’s Hamburg unit has underperformed and so the company impaired the plant’s goodwill. The line is now fully impaired (the write-off was EUR 3.6m), but the company still works to expand the unit’s customer base and volumes. Scanfil also closed the HASEC deal near the end of Q2 (the German unit contributed EUR 1.5m to Q2 revenue). Scanfil expects HASEC to contribute EUR 20m in revenue and EUR 1m in EBIT during H2’19. We now expect EUR 321m in H2’19 revenue (EUR 301m) and EUR 22m in H2’19 EBIT (EUR 20m). Scanfil’s updated guidance for FY 2019 is EUR 580-610m in revenue and EUR 39-42m in EBIT (previously EUR 560-610m and EUR 36-41m).
Minor estimate changes as the thesis remains unchanged
Scanfil’s H1’19 was on the slow side (largely due to Q1) in revenue terms, meaning volumes need to improve further in H2’19 if the FY ’19 guidance is to be met. The main risk is on the volume side; in our view Scanfil will have no problem reaching the EBIT target if the revenue goal is met. Scanfil still trades ca. 15-20% below its historical averages. We value Scanfil according to these multiples and thus hold our EUR 4.75 TP and BUY rating.
Scanfil reported Q2 revenue clearly below our expectations yet managed to beat our operating profit estimate. Operating margin remained strong despite 6% decline in revenue compared to previous year.
We expect Scanfil to remain one of the contract electronics manufacturers with better positioning amid a perennially competitive market for outsourced industrial electronics production. We view Scanfil’s strength premised on quality control, competitive pricing and good relationships with its key customers. In our view Scanfil’s valuation is at an attractive level as the current multiples represent a discount of some 20% compared to its own historical averages. We rate the shares BUY, TP at EUR 4.75 per share.
Scanfil remains well-positioned strategy-wise
While Scanfil’s short-term success is dependent on its most important customers’ products (the ten largest accounts generate ca. 60% of revenues), and these large industrial OEMs often face cyclical demand, Scanfil’s plant network can serve accounts both in the early stages of a product cycle and industrial electronics that are already being manufactured at high volumes, meaning Scanfil is able to nurture initially small customers and in the longer perspective graduate them to more significant revenues. However, such development demands patience as it will take a few years to reach a couple of million in annual sales (and this is only a fraction of the tens of millions required to be recognized as a major Scanfil customer).
Scanfil set to grow both organically and inorganically
Scanfil targets organic growth of ca. 3% in 2019-20 and a slight improvement in operating margin (7% in 2020). In our view these remain realistic targets, although success could be hampered by the softening of demand for a major customer product. Scanfil is still committed to screening the German market for acquisition targets (after announcing a deal in May).
Both Scanfil and its peers valued at undemanding multiples
Scanfil has historically traded at EV/EBITDA and EV/EBIT multiples above 7x and 9x, while the company is currently valued at 5.7x and 7.4x (based on our 2019 estimates). This 20% discount is in line with the recent peer group development. We rate Scanfil BUY, our target price being EUR 4.75 per share.
Scanfil’s Q1 EBIT, at EUR 6.8m, came in below our EUR 8.0m estimate, while the EUR 130m sales topped our EUR 125m estimate. Scanfil did warn Q1 would be slow due to a few major customers and still expects clear pick-up in activity in Q2. We leave our growth and margin estimates unchanged, retaining our TP of EUR 4.75 and BUY rating.
The 7% y/y revenue decline was due to two segments
Scanfil reorganized its segments in the beginning of 2019. The new structure includes Communication (previously Networks & Communications; 14% of Q1 sales), Consumer Applications (parts of Urban Applications and Other Industries; 18% of Q1 sales), Energy & Automation (some contracts added from other segments; 20% of Q1 sales), Industrial (parts of Urban Applications and Other Industries; 28% of Q1 sales), and Medtec & Life Science (21% of Q1 sales) segments. The Q1 revenue decline was attributable to the Consumer Applications (35% y/y decrease) and Communication (20% y/y decrease) segments. The other three segments’ revenues were either flat or increasing. Scanfil also expects Consumer Applications’ top line to grow in 2019 despite the plan to halt the production of a single major product where demand has been low since Q3’18.
Q1 EBIT margin low due to volumes and product mix
Scanfil managed a meagre 5.3% operating margin in Q1 (7.4% a year ago) owing to both low sales volumes and a suboptimal product mix. Although Scanfil has now posted substandard margins for two consecutive quarters (Q4 EBIT was similarly low due to product mix), we continue to expect 6-7% operating margins going forward. Scanfil targets 7% operating margin.
Our target price remains unchanged at EUR 4.75 per share
Scanfil’s peer group valuation multiples have stayed largely flat since the previous earnings report. Scanfil currently trades at 6.1x EV/EBITDA ‘19e and 7.8x EV/EBIT ‘19e, a valuation level in line with the peer group. Moreover, as we see no changes to Scanfil’s longer term outlook, we retain our target price of EUR 4.75 per share and leave our rating BUY.
Scanfil missed our Q1 EBIT estimate of EUR 8.0m, the figure coming in at EUR 6.8m. The company said earlier Q1 will be relatively slow, citing low demand among a few significant customers. Scanfil continues to expect customer demand to pick up during Q2, holding on to its earlier guidance for the year.
Scanfil’s Q4 EBIT didn’t meet our expectations. However, the weakened operating margin was attributable to Scanfil’s account idiosyncrasies. Certain contracts with above average profitability lacked volumes in Q4. Overall, the company sees business continuing as before, and we expect organic revenue growth to add around EUR 20m in 2019. 2020 sales target stands at EUR 600m. We update our target price to EUR 4.75 (4.60); our rating stays BUY.
Individual contracts determine quarterly segment results
Although Other Industries segment grew 18% in 2018, the segment’s Q4 results were weak due to a significant decrease in demand from a certain notable customer. Urban Applications Q4 top line declined by 12% y/y due to one or two accounts’ seasonal variation. In other words, the Q4 EBIT margin weakness was entirely attributable to a couple of accounts that are above average in terms of profitability. Broadly speaking, demand continued to develop positively and the company’s guidance for 2019 is in line with our earlier expectations. While individual accounts may have large impact on specific segment results, we expect MedTech, Life Science and Environmental Measurement to be the most stable performer. Conversely, within a segment such as Networks and Communication, it is hard to say when larger order volumes may materialize (i.e. when a standard such as 5G starts to have an impact).
Scanfil expects Q1 to be slower, demand to pick up in Q2
Scanfil says the year will have a sluggish start; the company expects clear demand pick up during the second quarter. The company is adding new customers particularly in Sweden. In addition to organic growth, initiatives such as a EUR 50m acquisition in e.g. Germany are not off the table.
Our rating is BUY, update target to EUR 4.75 (4.60)
Our long-term expectations for Scanfil are intact. Increased peer multiples provide lift for valuation, and thus we update our target price to EUR 4.75 (4.60) per share.
Scanfil’s Q4 results didn’t reach our estimates. We expected an EBIT margin of 6.0%, while the company delivered 5.4%. Nevertheless, the full year saw robust growth and operating profit development. The BoD proposes a dividend of EUR 0.13 per share for 2018 (vs our expectation of EUR 0.14).
|Shareholders||Date||% of shares||% of votes|
These research reports have been prepared by Evli Research Partners Plc (“ERP” or “Evli Research”). ERP is a subsidiary of Evli Plc.
None of the analysts contributing to this report, persons under their guardianship or corporations under their control have a position in the shares of the company or related securities. The date and time for any price of financial instruments mentioned in the recommendation refer to the previous trading day’s closing price(s) unless otherwise stated in the report. Each analyst responsible for the content of this report assures that the expressed views accurately reflect the personal views of each analyst on the covered companies and securities. Each analyst assures that (s)he has not been, nor are or will be, receiving direct or indirect compensation related to the specific recommendations or views contained in this report.
Companies in the Evli Group, affiliates or staff of companies in the Evli Group, may perform services for, solicit business from, hold long or short positions in, or otherwise be interested in the investments (including derivatives) of any company mentioned in the publication or report. Neither ERP nor any company within the Evli Group have managed or co-managed a public offering of the company’s securities during the last 12 months prior to, received compensation for investment banking services from the company during the last 12 months prior to the publication of the research report.
ERP has signed an agreement with the issuer of the financial instruments mentioned in the recommendation, which includes production of research reports. This assignment has a limited economic and financial impact on ERP and/or Evli. Under the assignment ERP performs services including, but not limited to, arranging investor meetings or –events, investor relations communication advisory and production of research material. ERP or another company within the Evli Group does not have an agreement with the company to perform market making or liquidity providing services. For the prevention and avoidance of conflicts of interests with respect to this report, there is an information barrier (Chinese wall) between Investment Research and Corporate Finance units concerning unpublished investment banking services to the company. The remuneration of the analyst(s) is not tied directly or indirectly to investment banking transactions or other services performed by Evli Plc or any company within Evli Group.
This report is provided and intended for informational purposes only and may not be used or considered under any circumstances as an offer to sell or buy any securities or as advice to trade any securities.
This report is based on sources ERP considers to be correct and reliable. The sources include information providers Reuters and Bloomberg, stock-exchange releases from the companies and other company news, Statistics Finland and articles in newspapers and magazines. However, ERP does not guarantee the materialization, correctness, accuracy or completeness of the information, opinions, estimates or forecasts expressed or implied in the report. In addition, circumstantial changes may have an influence on opinions and estimates presented in this report. The opinions and estimates presented are valid at the moment of their publication and they can be changed without a separate announcement. Neither ERP nor any company within the Evli Group are responsible for amending, correcting or updating any information, opinions or estimates contained in this report. Neither ERP nor any company within the Evli Group will compensate any direct or consequential loss caused by or derived from the use of the information represented in this publication.
All information published in this report is for the original recipient’s private and internal use only. ERP reserves all rights to the report. No part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, or stored in any retrieval system of any nature, without the written permission of ERP.
This report or its copy may not be published or distributed in Australia, Canada, Hong Kong, Japan, New Zealand, Singapore or South Africa. The publication or distribution of this report in certain other jurisdictions may also be restricted by law. Persons into whose possession this report comes are required to inform themselves about and to observe any such restrictions.
Evli Plc is not registered as a broker-dealer with the U. S. Securities and Exchange Commission (“SEC”), and it and its analysts are not subject to SEC rules on securities analysts’ certification as to the currency of their views reflected in the research report. Evli is not a member of the Financial Industry Regulatory Authority (“FINRA”). It and its securities analysts are not subject to FINRA’s rules on Communications with the Public and Research Analysts and Research Reports and the attendant requirements for fairness, balance and disclosure of potential conflicts of interest. This research report is only being offered in U.S. by Auerbach Grayson & Company, LLC (Auerbach Grayson) to Major U.S. Institutional Investors and is not available to, and should not be used by, any U.S. person or entity that is not a Major U.S. Institutional Investor. Auerbach Grayson is a broker-dealer registered with the U.S. Securities and Exchange Commission and is a member of the FINRA. U.S. entities seeking more information about any of the issuers or securities discussed in this report should contact Auerbach Grayson. The securities of non-U.S. issuers may not be registered with or subject to SEC reporting and other requirements.
ERP is not a supervised entity but its parent company Evli Plc is supervised by the Finnish Financial Supervision Authority.
Scanfil expects to generate EUR 800-880m in revenue and EUR 43-48m in adjusted operating profit for 2022
Scanfil targets 5-7% organic CAGR in revenue and 7% operating margin
For professional investors wishing to discuss the case, please book a complimentary analyst call